I'm ready to buy a dvd recorder & could do with a bit of advice. I have been told to go for a machine that records in a dvdr-r format not dvd+r as most players are dvd- compatible. Is this the case.Is this a VHS v Betamax situation?
Can anyone that has already bought one offer any advice.
It's basically to transfer loads of VHS stuff onto dvd, I will still burn dvd to dvd on a pc.
DVD recorder reccommendations.
-
- Utterly Bastard Groovy Amphetamine Filth
- Posts: 662
- Joined: 31 Jan 2002, 00:00
- Location: East Yorkshire
Give me one good reason
- markfiend
- goriller of form 3b
- Posts: 21181
- Joined: 11 Nov 2003, 10:55
- Location: st custards
- Contact:
If you're copying DVDs on your computer it shouldn't matter which format the recorder uses should it? You can play back your originals on the DVD recorder, and your puter should be able to copy DVD-R to DVD+R or vice-versa.
Although I don't (yet) own a DVD recorder, so what do I know?
Although I don't (yet) own a DVD recorder, so what do I know?
The fundamental cause of the trouble is that in the modern world the stupid are cocksure while the intelligent are full of doubt.
—Bertrand Russell
—Bertrand Russell
Whatever you buy make sure it has a Panasonic or Pioneer badge on the front. Don't touch Philips with a bargepole.Spiggy's hat wrote:I'm ready to buy a dvd recorder & could do with a bit of advice. I have been told to go for a machine that records in a dvdr-r format not dvd+r as most players are dvd- compatible. Is this the case.Is this a VHS v Betamax situation?
Can anyone that has already bought one offer any advice.
It's basically to transfer loads of VHS stuff onto dvd, I will still burn dvd to dvd on a pc.
Best bet is to use rewriteables (or DVD-RAM in the case of the Panasonic) then copy to DVD-R using the PC then you can re-use the rewriteables over and over (keep them in good nick though as these machines tend to be very fussy about light scratches etc). The Panasonic machines allow basic editing if you use DVD-RAM discs. I'm planning to buy one of these very soon to replace the Philips machine I foolishly bought a couple of years ago.
Or if you are feeling really adventurous, record to DVD-RW, (or DVD-RAM), decrypt the disc to mpeg on the PC, get a hold of some decent DVD authoring software and use this to make fancy menus, chapters, etc, and burn the finished product to DVD-R. I do this on occasion (ie when I can be bothered). Time consuming but worth it.
- hallucienate
- Overbomber
- Posts: 4602
- Joined: 17 Apr 2002, 01:00
- Location: /\/¯¯¯¯¯\/\
- Contact:
just out of interest, how do stand alones handle recording onto dual layer disks?
They don't. The current models anyway. The next generation machines should though.hallucienate wrote:just out of interest, how do stand alones handle recording onto dual layer disks?
As far as I know anyway......I haven't really been keeping up as I bought my machine so long ago.
- Quiff Boy
- Herr Administrator
- Posts: 16795
- Joined: 25 Jan 2002, 00:00
- Location: Lurking and fixing
- Contact:
i've thought about doing just thatDerekR wrote:Or if you are feeling really adventurous, record to DVD-RW, (or DVD-RAM), decrypt the disc to mpeg on the PC, get a hold of some decent DVD authoring software and use this to make fancy menus, chapters, etc, and burn the finished product to DVD-R. I do this on occasion (ie when I can be bothered). Time consuming but worth it.
but isnt mpeg a lossy compression format? so when you convert it onto your pc it loses quality?
What’s the difference between a buffalo and a bison?
-
- Utterly Bastard Groovy Amphetamine Filth
- Posts: 662
- Joined: 31 Jan 2002, 00:00
- Location: East Yorkshire
Cheers for the replies.
Just went out to buy one from Index, but they were out of stock According to them, dvdr's will be selling like hot cakes between now & christmas.
Just went out to buy one from Index, but they were out of stock According to them, dvdr's will be selling like hot cakes between now & christmas.
Give me one good reason
Yep, and the quality is selected on the DVD recorder prior to recording.markfiend wrote:DVD is already compressed as mpeg isn't it?
@QB, I haven't noticed any quality loss when doing the ripping on the PC.
For authoring I would recommend Ulead DVD Workshop 2, relatively intuitive when you compare it to some of the more complicated authoring packages, and it does everything I want. Still haven't mastered animated menus yet though One day, one day....
Indeed. Men with ridiculously big hair and far too much lipstick.Quiff Boy wrote:enter jansenclone....DerekR wrote:Still haven't mastered animated menus yet though One day, one day....
Loki was never worshiped as the other Gods,
Which is quite understandable.
Which is quite understandable.
- Quiff Boy
- Herr Administrator
- Posts: 16795
- Joined: 25 Jan 2002, 00:00
- Location: Lurking and fixing
- Contact:
JB wrote:Indeed. Men with ridiculously big hair and far too much lipstick.Quiff Boy wrote:enter jansenclone....DerekR wrote:Still haven't mastered animated menus yet though One day, one day....
take your word for that. only seen the "adolescent sex" vid myself, but i'm sure my mate lars can see where you're coming from
What’s the difference between a buffalo and a bison?
- Hojyuu-obi
- Utterly Bastard Groovy Amphetamine Filth
- Posts: 634
- Joined: 10 Feb 2004, 23:26
- Location: 2000 Antwerp 4
If you have a standalone Philips or Sony DVD player DVD+R works perfectly fine (as far as I have experienced) ... other brands probably only support DVD-RDerekR wrote:Whatever you buy make sure it has a Panasonic or Pioneer badge on the front. Don't touch Philips with a bargepole.Spiggy's hat wrote:I'm ready to buy a dvd recorder & could do with a bit of advice. I have been told to go for a machine that records in a dvdr-r format not dvd+r as most players are dvd- compatible. Is this the case.Is this a VHS v Betamax situation?
Can anyone that has already bought one offer any advice.
It's basically to transfer loads of VHS stuff onto dvd, I will still burn dvd to dvd on a pc.
Best bet is to use rewriteables (or DVD-RAM in the case of the Panasonic) then copy to DVD-R using the PC then you can re-use the rewriteables over and over (keep them in good nick though as these machines tend to be very fussy about light scratches etc). The Panasonic machines allow basic editing if you use DVD-RAM discs. I'm planning to buy one of these very soon to replace the Philips machine I foolishly bought a couple of years ago.
Or if you are feeling really adventurous, record to DVD-RW, (or DVD-RAM), decrypt the disc to mpeg on the PC, get a hold of some decent DVD authoring software and use this to make fancy menus, chapters, etc, and burn the finished product to DVD-R. I do this on occasion (ie when I can be bothered). Time consuming but worth it.
Have you any dreams you'd like to sell?