I've recently been recording my vinyl records onto the PC (using Adobe Audition 3.0) and am wondering if there's any tips for restoring the tracks?
I'm already removing the noise (using Adobe's 'noise reduction' tool) and clicks/pops but I don't have much knowledge with regards to EQ.
I read that bass is a lot heavier in output than treble and I've found that some of the recordings are quite bassy (especially tracks with drum-machines) but then others sound fairly balanced.
Are there any things I should be doing to get the best out of the records?
Digitalizing & Remastering Vinyl Records
Best tip is to not overdo anything. Light touches all the way. If you've got your records in good condition and are using a decent turntable, that'll get you way more mileage than any amount of filters and effects.
If I told them once, I told them a hundred times to put 'Spinal Tap' first and 'Puppet Show' last.
I'd side with Michael on that.
You want to end up with the "original" really.
If you do too much tinkering, you can really fcuk it up.
I'd record it "flat" & use whatever EQ you have in your media player to adjust when you're listening.
The key is the source & the equipment the source is being "translated" from.
If it's pants, then the digitised version will also be pants.
The cleaner (un fcuked up) the signal path, the better.
You want to end up with the "original" really.
If you do too much tinkering, you can really fcuk it up.
I'd record it "flat" & use whatever EQ you have in your media player to adjust when you're listening.
The key is the source & the equipment the source is being "translated" from.
If it's pants, then the digitised version will also be pants.
The cleaner (un fcuked up) the signal path, the better.
- Maisey
- Slight Overbomber
- Posts: 1870
- Joined: 28 Jun 2006, 20:19
- Location: Moving like a Parallelogram
I generally don't tinker.
I've found that the noise from the wire connecting your player to the PC is always at the same volume, no matter what volume setting your record player is at. Thus if you record quietly and amplify the resultant signal you amplify the noise, but if you record loudly (just off clipping) you drown the noise right out.
I've found that the noise from the wire connecting your player to the PC is always at the same volume, no matter what volume setting your record player is at. Thus if you record quietly and amplify the resultant signal you amplify the noise, but if you record loudly (just off clipping) you drown the noise right out.
Nationalise the f**king lot.
- robertzombie
- Overbomber
- Posts: 4382
- Joined: 05 Sep 2005, 12:49
- Location: London
You can remove the noise (pretty much) completely with Audacity/Adobe/any other
I'd keep keep a backup of the raw files, it's an importand fall-back option if you may get second thoughts about changing the sound in the future. Beside that you should leave the sound as untouched as possible - to maintain the source quality. Or do you need a correction because your record player doesn't sound neutral?
- frederik
- Gonzoid Amphetamine Filth
- Posts: 454
- Joined: 18 Mar 2006, 14:37
- Location: above the dentist
indeed, less = more
from the adobe software I only use (if necessary) a light hiss reduction to transfer my tapes...
most important are your soundcard, connecting cables, tape-vinyl deck...
so make sure you have a good setup and leave all the mastering tools for studio experts
from the adobe software I only use (if necessary) a light hiss reduction to transfer my tapes...
most important are your soundcard, connecting cables, tape-vinyl deck...
so make sure you have a good setup and leave all the mastering tools for studio experts
- robertzombie
- Overbomber
- Posts: 4382
- Joined: 05 Sep 2005, 12:49
- Location: London
The record player and most of the records are in tip-top condition. The transfers sound fine apart from the fact that a few are noticeably bassy.